3DR BLUETOOTH DATA LINK PX4 PX4-KIT-0014

Connect to your vehicle using Bluetooth! This Bluetooth data link module allows you to connect a Pixhawk or APM autopilot to a Bluetooth-compatible Android device using DroidPlanner or Andropilot ground station apps. Leave your telemetry radio and OTG cable at home, and make a direct Bluetooth connection for pre-flight mission planning and vehicle setup.

Click here to view instructions.

Includes:

• Bluetooth module
• Pixhawk cable (six-position DF13 to FTDI) 20 cm
• APM cable (five-position DF13 to FTDI) 20 cm

Specs:

• Dimensions : 1.4″ x 0.6″ x 0.17″
• Weight 9.6 g (0.3 oz)
• Operation voltage: 3.6 to 6 V
• I/O level: 3.3 V
• Typical -80dBm sensitivity
• Up to +4dBm RF transmit power
• UART interface with programmable baud rate
• Default baud rate: 57600
• Supported baud rates: 9600, 19200, 38400, 57600, 115200, 230400, 460800
• Pairing code: 1234
• Auto-connect to the last device on power as default
• Permit pairing device to connect as default
• Integrated antenna
• Range: 50 m

Note: This module is intended for pre-flight ground use only. It is not a replacement for an RC transmitter and receiver. The range of the connection is limited to standard Bluetooth range (50 m).